There is some disagreement within the industry about the best method for cleaning air ducts.  The two schools of thought are the “negative air” approach and the rotary brush and vacuum approach.  We believe that both air duct cleaning methods can achieve great results in most situations when performed properly by competent technicians.  However, our focus has always been on high quality residential service.  The type of residential duct work commonly used in homes in the South poses unique challenges to duct cleaners because it is soft, flexible, and does not go in straight lines.  Firms using the negative air approach are especially challenged by this type of duct work, as that process was originally designed to work well on the rigid metal duct work commonly found in the North and in large commercial buildings.  The tools used to agitate the duct work in negative air cleaning are very difficult to get all the way into your duct work and can damage the lining of the ducts we find in most residences in the greater Jacksonville area.

Mold in the air ducts can be an easy DIY fix. First, turn OFF your HVAC system. Find an approved cleaning solution. Pour or spray the solution on the infected area. Put on protective gear and a mask - you do not want to make contact with the mold (or chemicals! or breathe it in. Scrub the area using disposable towels or brushes, and be sure to check the drip pan and evaporator coils. Vacuum the affected areas after cleaning. Bag all your rags and utensils and dispose of properly. Apply an inhibitor to the affected areas to prevent future growth. It is recommended to call a professional if you have more than 10 square feet of mold as this may be too big of a job, or there might be other/larger issues. Even if you don’t have more than 10 square feet of mold, you can still call a professional to clean it up.
Make certain that the business has the correct devices and sufficient HEPA filtered vacuum power (2,000 CFMs or more), to appropriately clean your duct. Be tired of business that utilizes little vacuum systems that have a little turning brush on completion of a little vacuum hose with a normal air flow of 150 to 300 cfm or less. Appropriate duct cleaning vacuums are damaging air devices with 2,000 CFMs have 8 inches to 14 inches or bigger, vacuum hoses to record big amounts of dust and particles.
We are a division of THE ENVIRONMENTAL AIR FORCE LLC in Jacksonville and are certified Duct Cleaners, Home Inspectors, and Mold Inspectors/Remediators and therefore our dryer vent cleaning service includes cleaning the dryer vent, the hook-up to the dryer, and the dryer filter port. It also includes an indoor air health check, AC duct check, and AC system microbial check.
"So My A.C. suddenly went belly up and I needed a total brand new unit inside and out. So a little background on myself. I'm an engineer, so I know a little bit about A.C. and how they work. I'm by no means an expert, but it does allow me to detect if the A.C. guy knows his stuff, especially if they don't know what I do. 😉 And I'm happy to say, these guys do. One of the things that helped me chose them is that they brought up the importance of controlling humidity. None of the other contractors I spoke to, mentioned that. I also appreciate the fact that he didn't try to "up sell" me and get me to buy things I didn't need. He was on time, honest and forth coming about what I needed and what I didn't. When the workers came, they were on time, very professional and very CLEAN. After they left, I couldn't tell they had been there. Highly recommended this service."
×